manualshive.com logo in svg

Sound Devices 702T, User Manual, Page: 38 / 84

Share
Download
Sound Devices 702T User Manual Download Page 38

702T User Guide and Technical Information 

36

v. 2.67 

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

During recording, subsequent presses of the Record button can perform one of three setup-menu-

selected actions: 

•  no action, 

•  new cue - cue markers are set within the file being written, 

•  new file - a new file is started with each press of the record button, the take counter is increased 

by one. 

When removing the Compact Flash card after recording, always observe the amber CF activity LED. If 
it is lit, wait until it goes out before removing the card. If you remove the CF while the LED is lit, the file 
will be corrupted and there is a possibility of FAT corruption as well. 

Pre-Record Buffer 

To prevent missing record cues or up-cutting takes, the 702T has pre-record (or pre-roll) buffering 

available. When active, pre-record begins recording at a set number of seconds PRECEDING the 

record button being pressed. The amount of pre-record is sample-rate-dependent. At 48 kHz, ten sec-

onds of buffered audio is available. At a 96 kHz sampling rate five seconds is available. At very high 

rates (192 kHz) two seconds of pre-record buffer is available. 

Record buffering is disabled when the time code mode is set to Record Run, External Time Code 

Auto Record, and External Time Code Continuous Auto Record.. This prevents possible overlapping 

time code numbers between adjacent files. 

Failure During Recording 

In the event of a recording media failure the error will be indicated on the front panel and by a tone 

in headphones. Possible causes of media failure include a full CompactFlash card or a card not ca-

pable of keeping up with the record data. 

Front Panel Lockout 

See 

Panel Lock

 on page 8 to engage panel lock to prevent changes while recording.

Record Pause

This allows a recording to be stopped then continued without creating a new take or file. Record 

Pause is useful for live music recording, reporter interviews, or any other application that can benefit 

by stopping and starting recording without generating a new file. To use the Record Pause Feature:

1.  Access the Setup Menu option REC: Record Pause and select Enabled.

The Record Pause feature does not support time code. If the Record Pause Enabled setting is crossed out, 
time code is active and must be turned off before Record Pause is available. 

Summary of Contents for 702T





















































































Reviews:

No comments