Sorvall WX 100 Ultra, Instruction Manual, Page: 22 / 131

Operation
Basic operation
2-6 WX Ultra Series Thermo Scientific
Figure 2-4
Setting indicator
How to set speed, running time, temperature, and other parameters
Here are some examples and descriptions:
Note
1. If you enter the wrong value, press CE key to return to the input wait state.
If you have pressed ENTER key, press a cursor key, enter the device into an input wait state,
then enter the correct value.
2. When setting two or more run conditions, you do not have to press ENTER key after each
setting. Pressing the cursor key will enter the setting, thus making the system wait for a new
input.
3. If the system is running in (HOLD) and you want to set it to shut down at a future time, enter
a new time setting while the instrument is in operation; enter the sum of the time elapsed plus
the time remaining. If, for example, this machine has run continuously for five hours and you
want to stop it one and a half hours later, use cursor keys to enter TIME into an
input wait state,
then enter
Setting item RPM (SPEED Running time (TIME)
Typical setting 100,000 rpm 2 hours 30 minutes
Cursor key
Cursor (blinking)
The system does not accept a
numerical input.
(1) Determined input state
The system accepts a numerical input.
Use cursor keys to move to the next
setting item.
(2) Input wait state