SRP-X500P RS-232C Interface Manual
•
SETUP STATUS
Shows the progress of the FEED BACK REDUCER setting.
The parameter and the progress are as shown in the following table.
Progress
Stopped (finished)
0x30 (‘0’)
1 0x31
(‘1’)
2 0x32
(‘2’)
3 0x33
(‘3’)
4 0x34
(‘4’)
5 0x35
(‘5’)
6 0x36
(‘6’)
7 0x37
(‘7’)
8 0x38
(‘8’)
9 0x39
(‘9’)
10 0x3A
(‘:’)
11 0x3B
(‘;’)
12 0x3C
(‘<‘)
13 0x3D
(‘=‘)
14 0x3E
(‘>‘)
15 0x3F
(‘?’)
♦
AV/RGB INPUT SELECT (56th byte)
Shows the selection of the channel input from among the AV/RGB INPUT connectors.
The parameter and the channel are shown in the following table.
Channel
OFF (All the AV RGB SELECT buttons are turned off.)
0x30 (‘0’)
A (The AV RGB SELECT A button lights up.)
0x31 (‘1’)
B (The AV RGB SELECT B button lights up.)
0x32 (‘2’)
C (The AV RGB SELECT C button lights up.)
0x33 (‘3’)
D (The AV RGB SELECT D button lights up.)
0x34 (‘4’)
E (The AV RGB SELECT E button lights up.)
0x35 (‘5’)
♦
SPEAKER OUTPUT LEVEL (57th, 58th byte)
Shows the level of the SPEAKER OUT controls on the front panel of the SRP-X500P.
The SPEAKER OUTPUT LEVEL parameter consists of the 2 bytes of data in the order shown in the
following table.
Byte Parameter
1st
SPEAKER OUTPUT CH1/2 LEVEL
2nd
SPEAKER OUTPUT CH3/4 LEVEL
The correspondence of the parameter with the speaker output level is the same as that of the LEVEL
parameter of the REMOTE 1-6 LEVEL command (page 10).
Page 32/43