SRP-X500P RS-232C Interface Manual
♦
LINE TRIM (43rd byte)
Shows the setting of the TRIM controls for the LINE input on the front panel of the SRP-X500P (in
dBu units).
The parameter and the TRIM control setting are shown in the following table.
TRIM
TRIM
-30
0x30 (‘0’)
-14
0x40 (‘@’)
-29
0x31 (‘1’)
-13
0x41 (‘A’)
-28
0x32 (‘2’)
-12
0x42 (‘B’)
-27
0x33 (‘3’)
-11
0x43 (‘C’)
-26
0x34 (‘4’)
-10
0x44 (‘D’)
-25
0x35 (‘5’)
-9
0x45 (‘E’)
-24
0x36 (‘6’)
-8
0x46 (‘F’)
-23
0x37 (‘7’)
-7
0x47 (‘G’)
-22
0x38 (‘8’)
-6
0x48 (‘H’)
-21
0x39 (‘9’)
-5
0x49 (‘I’)
-20
0x3A (‘:’)
-4
0x4A (‘J’)
-19
0x3B (‘;’)
-3
0x4B (‘K’)
-18
0x3C (‘<‘)
-2
0x4C (‘L’)
-17
0x3D (‘=‘)
-1
0x4D (‘M’)
-16
0x3E (‘>‘)
0
0x4E (‘N’)
-15 0x3F
(‘?’)
♦
AV/RGB TRIM (44th-48th byte)
Shows the setting of the TRIM controls for the AV/RGB input on the front panel of the SRP-X500P (in
dBu units).
The AV/RGB TRIM parameter consists of the 5 bytes of data in the order shown in the following table.
Byte Parameter
1st AV/RGB
INPUT
A
TRIM
2nd
AV/RGB INPUT B TRIM
3rd
AV/RGB INPUT C TRIM
4th
AV/RGB INPUT D TRIM
5th
AV/RGB INPUT E TRIM
The correspondence of the parameter with the TRIM control settings is the same as that of the LINE
TRIM parameter.
♦
REF INDICATOR (49th byte)
Shows the status of the REF. indicators on the front panel of the SRP-X500P in the form of 8 bits of
data.
The bit is 0 for indicators that are turned off and 1 for indicators that are turned on.
MSB
LSB
bit7 bit6 bit5
bit4 bit3 bit2 bit1 bit0
0
1
AV/RGB
LINE
MIC 4 MIC 3 MIC 2 MIC 1
/WL 2 /WL 1
Page 30/43
