Sony PXW-X500, Service Manual

Page: 116 / 184

2-15-2. SW-1632 Board, AXM-52 Board
Preparation
1. Remove the outside panel assembly. (Refer to “2-2. Outside Panel Assembly” )
2. Remove the bracket (WA) assembly. (Refer to “2-6. Wi-Fi Module/SD-58 Board” )
3. Remove the inside panel assembly. (Refer to “2-3-1. Inside Panel Assembly” )
4. Remove the DCP-67 board. (Refer to “2-9. DCP-67 Board” )
5. Remove the HPR-53 board. (Refer to “2-10. HPR-53 Board” )
6. Remove the DPR-362 board. (Refer to “2-11. DPR-362 Board” )
7. Remove the EC-82 board. (Refer to “2-12. EC-82 Board” )
8. Remove the duct box assembly . (Refer to “2-13. DC Fan (40 Square)” )
9. Remove the connector box assembly . (Refer to “2-15-1. Connector Box Assembly” )
Procedure
1. Remove the tape 50 and the three tapes AS, and release the DC-IN harness and the three coaxial cables.
Tape AS
Tape 50
DC-IN harness
Coaxial cables
Tapes AS
About
10mm
PXW-X500
2-62