Sony PXW-X500, Service Manual

Page: 79 / 184

2-4-2. CCD Block Assembly
Note
Hexagonal wrenches (Width across : 1.5 mm, 2.5 mm) are necessary as tools.
Preparation
1. Remove the outside panel assembly. (Refer to “2-2. Outside Panel Assembly” )
2. Remove the inside panel assembly. (Refer to “2-3-1. Inside Panel Assembly” )
3. Remove the front assembly. (Refer to “2-4-1. Front Assembly” )
Removing Procedure
1. Remove the CCD block assembly.
1) Remove the set screw and remove the filter knob from the knob shaft.
2) Remove the mount lever.
3) Remove the four hexagon socket head bolts and four spring washers, and remove the CCD block assembly
and the shield finger (LM).
Note
Do not directly touch shield finger (LM). Be careful not to get hurt with the edges when handling them.
Shield finger (LM)
Filter knob
Set screw
CCD block assembly
SW3
HEXAGON
M3 x 8
Knob shaft
Mount lever
PXW-X500
2-25