Sony PXW-X500, Service Manual

Page: 138 / 184

2-digit Sub Code Description
A Sub display module
B USB module
C Wi-Fi module
D GPS module
E GMON: Monitor FPGA IC2301 (DPR-362 board)
F GMON: Monitor FPGA IC2301 (DPR-362 board)
When detecting with DIABLO (IC2900: DPR-362 board) (When the 3-digit of the sub code is “2”):
2-digit Sub Code Description
1 EMMA: Application processor IC4200 (DPR-362 board)
2 DIABLO: Media processor IC2900 (DPR-362 board)
3 ROSETTA: Video signal processor IC0100 (DPR-362 board)
4 NATH: MPEG2 video codec IC1500 (DPR-362 board)
5 BEAUNE: XAVC video codec IC1100 (DPR-362 board)
When detecting with ROSETTA (IC0100: DPR-362 board) (When the 3-digit of the sub code is “3”):
2-digit Sub Code Description
1 EMMA: Application processor IC4200 (DPR-362 board)
2 DIABLO: Media processor IC2900 (DPR-362 board)
3 ROSETTA: Video signal processor IC0100 (DPR-362 board)
4 VUP CPLD: IC2200 (DPR-362 board)
5 GMON: Monitor FPGA IC2301 (DPR-362 board)
6 ETC: Interface FPGA IC100 (HPR-53 board)
7 Audio block
8 ADV7320: Digital video encoder IC0403 or IC2700 (DPR-362 board)
9 MN864716: HDMI encoder IC001 (DIF-232 board)
A Lens interface
B EXT interface
C GMON (700P): Monitor FPGA IC2301 (DPR-362 board)
D ETC (EQ DRIVE): Interface FPGA IC100 (HPR-53 board)
E Imager block
F ETC: Interface FPGA IC100 (HPR-53 board)
Abnormal Symptom Code (1-digit Sub Code)
1-digit Sub Code Description
0 Error of communication between CPU and peripheral devices (or interface hardware error)
(Two or more causes or irregularity is included.)
3 Data parity error or data verify error between CPU and peripheral devices
5 Communication between CPU and peripheral devices is not completed in the specified time period.
7 Failure of flash memory configuration
8 Communication error of flash memory (or eMMC)
9 Communication error of EEPROM
A Communication error of SDRAM
B Communication error of recording media
C Error of temperature sensor
D Communication error of RTC
PXW-X500
3-2