3.
Adjust H Saw, H Para, V Saw and V Para for the respective channels of G-ch, B-ch and R-ch until waveform on
the waveform monitor becomes flat.
(H SAW)
(H PARA)
(V SAW)
(V PARA)
Black Shading Adjustment
The Black Shading menu enables the adjustment of the horizontal and vertical Saw correction level and parabola
correction level.
Black Saw/Para
The Black Saw/Para menu can be used to turn Black Shading correction On or Off. The Black Saw/Para is turned On
automatically when the power is turned On.
Channel Sel
The Channel Select menu enables selection of the channel (G-ch or B-ch or R-ch) to execute the H Saw, H Para, V Saw,
and V Para black shading adjustments on.
When the Channel Select menu selects any other channel, the displays of the H Saw, H Para, V Saw, and V Para setup
values are changed to the current setup values of the channel selected by the Channel Select menu. The changes are
reflected on the H Saw, H Para, V Saw, and V Para setup values.
Black H Saw
The H Saw menu enables the horizontal Saw black shading correction (linear increase and decrease) level.
Black H Para
The H Para menu enables the horizontal Parabola black shading correction (black level correction at the horizontal center
with respect to both ends) level.
Black V Saw
The V Saw menu enables the vertical Saw black shading correction (linear increase and decrease) level.
Black V Para
The V Para menu enables the vertical Parabola black shading correction (black level correction at the vertical center
with respect to both ends) level.
Master Black
Master black level is set.
Master Gain (TMP)
Master gain value is selected.
Black Shading Adjustment Method
Preparation
1.
Connect an HD waveform monitor to the SDI OUT terminal.
2.
HD waveform monitor setting: RGB mode
PXW-X500
4-8
Summary of Contents for PXW-X500
