18
Chapter 1
Preparation
Chapter 1
IN
UX2
AUX1
X OUT
MONITOR OUT
IR OUT1 IR OUT2
ISDN A
1
2
VIDEO
IR repeater (supplied)
Battery life
When the Remote Commander no longer functions properly,
replace both the batteries.
Notes on batteries
To avoid possible damage from battery leakage or corrosion,
observe the following:
• Be sure to insert the batteries in the correct direction.
• Do not mix old and new batteries, or different types of
batteries.
• Do not attempt to charge dry-cell batteries.
• If you do not intend to use the Remote Commander for a long
time, remove the batteries.
If battery leakage occurs, clean the battery compartment and
replace all the batteries.
Preparing the TV Monitor
Insert the IR repeater below the remote sensor of the TV
monitor. Once you set the IR repeater, you can turn on the
Compact Processor and a Sony TV monitor together by
pressing the
I
/1
button on the Remote Commander.
If the IR repeater does not function properly, set Monitor Mode
in the General Setup menu to MODE2 (PCS-1600); to MODE4
(PCS-1600P).
For details on the Monitor Mode setting, see “General Setup
Menu” on page 109.
to IR OUT1
Remote sensor
Preparing the System
