Sony PCS-1600 Page 119 Operating Instructions Manual Download

Page: 119 / 171

Chapter 5

Meetings With Optional Equipment

119

Chapter 5

Upgrading the Software

Follow the procedure below to upgrade the software (PCS-
UC160/UC161).

Insert the “Memory Stick” into the Memory Stick slot.

Insert it in the arrow mark direction with the mark faced
upward.

Turn on the Compact Processor.

After the upgrade is complete, the launcher menu appears.

Note

Do not turn off the power or eject the “Memory Stick”
before the launcher menu appears.

Push the “Memory Stick” inward, then release your finger.

The “Memory Stick” comes out a little.

Open the Machine Information menu to check upgrading is
complete.

For details on the Machine Information menu, see
“Machine Information Menu” on page 116.

Stick the serial number sticker to the bottom of the
Compact Processor.

Summary of Contents for PCS-1600












































































































































































Search results

Summary of Contents for PCS-1600

Reviews:

Related manuals for PCS-1600

Brands by name

Popular brands

Sony PCS-1600, Operating Instructions Manual

Search results

Summary of Contents for PCS-1600

Reviews:

Related manuals for PCS-1600

Brands by name

Popular brands