44
Chapter 2
Basic Operation During a Meeting
Chapter 2
Calling a Remote Party
V.35: Connects to a TV conferencing system via the V.35
interface. (Option)
LAN: Connects to a TV conferencing system using a
LAN. (Option)
To set the number of lines to be connected for an
ISDN call
When a call is made using ISDN lines, choose the number of
lines to be used when the call is set up.
Select Number of Lines: with the joystick on the Remote
Commander, then press the joystick down.
Set the number of lines by moving the joystick up or down.
1B: Connects via 1B channel.
2B: Connects via 2B channels.
3B: Connects via 3B channels.
4B: Connects via 4B channels.
5B: Connects via 5B channels.
6B: Connects via 6B channels.
To select the LAN bandwidth to be used
When you are using a LAN, you can select the bandwidth to be
used from among the settings below.
64 Kbps, 128 Kbps, 384 Kbps, 512 Kbps, 768 Kbps, 1024
Kbps, Other
When you choose “Other,” you must enter the value yourself.
Bandwidths from 1 to 1024 Kbps can be entered.
4
Select the prefix setting.
Select Prefix with the joystick on the Remote Commander,
then press the joystick. Select the desired setting with the
joystick moving up or down, then press the joystick.
None: Does not use the prefix number.
Prefix-A: Uses the setting A set in the Dial Setup menu.
Prefix-B: Uses the setting B set in the Dial Setup menu.
Prefix-C: Uses the setting C set in the Dial Setup menu.
For details on the setting up the prefix number, see “Dial
Setup Menu” on page 100.