Sony PCS-1600 Page 27 Operating Instructions Manual Download

Page: 27 / 171

Chapter 1

Preparation

Chapter 1

Setting the System (Compact Conference Package) to
be on Standby

When the system is on standby, you can turn the system on
with the

button on the Remote Commander.

Press the

button on the Remote Commander.

The indication “Power off?” appears on the monitor
screen.

Select OK with the joystick on the Remote Commander,
then press the joystick, or press the

button on the

Remote Commander.

Both the Compact Processor and the TV monitor are
turned into standby.
The STANDBY lamp (orange) lights up.

To cancel turning into standby

Select Cancel using the joystick on the Remote Commander in
step

, then press the joystick.

Note

Do not turn off the POWER switch on the rear panel while the
menu is displayed on the monitor screen.

STANDBY lamp

Summary of Contents for PCS-1600












































































































































































Search results

Summary of Contents for PCS-1600

Reviews:

Related manuals for PCS-1600

Brands by name

Popular brands

Sony PCS-1600, Operating Instructions Manual

Search results

Summary of Contents for PCS-1600

Reviews:

Related manuals for PCS-1600

Brands by name

Popular brands