Sony PCS-1600 Operating Instructions Manual Download

Page: 26 / 171

Chapter 1

Preparation

Chapter 1

Turning the System On/Off

Set up the following items.

DHCP Mode:

Sets up the DHCP (Dynamic Host

Configuration Protocol).
Auto: Automatically gets your IP address, network
mask, gateway address, and DNS address.
Off: Sets DHCP to OFF. When set to OFF, enter your
IP address, network mask, gateway address, and DNS
address.

Host Name:

Enter your host name.

IP Address:

Enter your IP address.

Network Mask:

Enter your network mask.

Gateway Address:

Enter your default gateway address.

DNS Address:

Enter your DNS (Domain Name System)

server address.

Tip

When DHCP Mode is set to Auto, you can verify the acquired
IP address in the Machine Information menu (page 116).

Select Next with the joystick on the Remote Commander,
then press the joystick.

The message for verification appears.

Select Save with the joystick on the Remote Commander,
then press the joystick.

The setting is saved.

To cancel the setup

Select Cancel with the joystick on the Remote Commander,
then press the joystick.

To go back to the previous wizard

Select Previous with the joystick on the Remote Commander,
then press the joystick.

Cancel

Previous

Save

Summary of Contents for PCS-1600












































































































































































Search results

Summary of Contents for PCS-1600

Reviews:

Related manuals for PCS-1600

Brands by name

Popular brands

Sony PCS-1600, Operating Instructions Manual

Search results

Summary of Contents for PCS-1600

Reviews:

Related manuals for PCS-1600

Brands by name

Popular brands