50
Chapter 2
Basic Operation During a Meeting
Chapter 2
Answering Calls in Manual Answer Mode
When your system is in manual answer mode, you need to
connect incoming calls manually.
When a call comes in, the Compact Processor starts ringing,
and the indication “Incoming Call. Respond?” appears on the
monitor screen.
Select OK with the joystick on the Remote Commander, then
press the joystick.
Once the connection has been made, the remote party appears
on the local monitor screen, and local party appears on the
remote screen. You are now ready to hold your meeting.
The indication “MEETING STARTS!” appears on the monitor
screen.
If you do not want to receive a call
Select Cancel with the joystick, then press the joystick. The
Compact Processor stops ringing.
If you are operating the system when a call comes in
The indication “Incoming Call. Respond?” appears on the
monitor screen. If you receive the call, Select OK with the
joystick on the Remote Commander, then press the joystick. If
you cannot receive the call according to your current
operations, Select Cancel with the joystick on the Remote
Commander, then press the joystick.
When the system fails to make a connection
The indication “CANNOT COMPLETE CONNECTION”
appears along with an ISDN cause code and a message on the
monitor screen.
For details on ISDN cause codes and messages, see “On
Screen Messages” on page 155.
Receiving a Call
