Sony PCS-1600 Page 62 Operating Instructions Manual Download

Page: 62 / 171

Chapter 2

Basic Operation During a Meeting

Chapter 2

Adjusting the Camera

Select Auto Track with the joystick on the Remote
Commander, then press the joystick.

The frame appear on the monitor screen.

Use the joystick and the ZOOM/TV-CH buttons on the
Remote Commander to place a subject into the frame.

Notes

• Be sure to place the subject so that the portion uniform in

brightness and color is in the frame.

• The camera might not recognize a subject if the portion

different from the subject in brightness and color, such as
the backdrop, is placed together in the frame.

Press the joystick on the Remote Commander.

The indication

appears on the monitor screen.

The automatic target tracking function starts and the frame
disappears from the monitor screen.

To cancel the automatic target tracking function

Select Auto Track Stop with the joystick on the Remote
Commander, then press the joystick.
The indication

disappears from the monitor screen.

Adjustments

Auto Track

Camera

Preset Save

Preset Load

Summary of Contents for PCS-1600












































































































































































Search results

Summary of Contents for PCS-1600

Reviews:

Related manuals for PCS-1600

Brands by name

Popular brands

Sony PCS-1600, Operating Instructions Manual

Search results

Summary of Contents for PCS-1600

Reviews:

Related manuals for PCS-1600

Brands by name

Popular brands