Chapter 6
Meetings With the Multipoint Function
137
Chapter 6
The Manual Dial menu appears.
2
Select [
ISDN] in Line I/F.
3
Enter the telephone numbers only for the number of
participants in the meeting in A-1 through C-2.
A1, A2 are for the telephone number of the first remote
party.
B1, B2 are for the telephone number of the second remote
party.
C1, C2 are for the telephone number of the third remote
party.
(If the Number of Lines item has been set to [1 B], enter the
telephone numbers in the text boxes for A1, B1, and C1.)
Note
When ISDN (Telephone) is selected, you can connect to
only one remote location. When you enter the telephone
number, enter a “T” before the number.
4
Select [Dial] with the joystick on the Remote Commander,
then push the joystick down. Or use the Connect/
Disconnect button on the Remote Commander.
The telephone numbers of the remote parties selected in
step
3
are dialed, and “
Dialing (ISDN)” is displayed on
the monitor screen.
When the far end connection is made, “You can start the
conference..” is displayed on the monitor screen. You can dial one
remote location at a time by performing steps
1
to
3
for each one.
If some locations of the Multipoint connection are not
connected
The following dialog box appears
Manual Dial
A1:
Line I/F:
Save
Dial
A2:
Prefix:
Prefix-None
B1:
B2:
C1:
C2:
ISDN
Number of Lines:
6B
Restrict:
Auto
(Continued)
Disconnect All
Start Meeting
Status:
Cause Code:
Some positions were not connected.
Redial
A1
B1
C1
A2
B2
C2
