manualshive.com logo in svg

Sony PCS-1600, Operating Instructions Manual

Share
Download
Sony PCS-1600 Operating Instructions Manual Download Page 67

Chapter 2

Basic Operation During a Meeting

67

Chapter 2

4

Select Load with the joystick on the Remote Commander,
then press the joystick.

The menu disappears from the monitor screen and the
selected still picture is displayed.

To send a still picture

Select Send with the joystick on the Remote Commander, then
press the joystick. The selected picture will be sent.

To delete a still picture

Select Delete with the joystick on the Remote Commander,
then press the joystick. The selected picture will be deleted.

To view still pictures continuously with the slide
show function

Select Slide Show with the joystick on the Remote
Commander, then press the joystick. The slide show starts
from the selected still picture. The indication 

 appears on

the monitor screen while in the slide show.
Move the joystick to the right, the next picture is displayed,
and move the joystick to the left, the previous picture is
displayed.

To select the still picture

Press the joystick on the Remote Commander while in the slide
show, the sub-menu appears. Move the joystick on the Remote
Commander to the right or left to select the desired picture,
then press the joystick.

During communication, the still picture will be sent to the
remote terminal, and not during communication, the still
picture is displayed full-screen.

Stop

7  /49

Summary of Contents for PCS-1600












































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands