U
si
n
g t
h
e
M
e
nu
Using the Menu
59
SHOT TRANS
Select this setting to set the transition duration, time, and start timer. See page 40
for details on using the shot transition function.
b
Note
• Before setting [SHOT TRANS], turn off all of the STORE/CHECK/EXEC lamps by
pressing the button repeatedly (p. 40).
TRANS TIME
Select the time that takes to make a transition from the current setting to the
selected setting.
Duration from [2.0 sec] through [15.0 sec] are available. It is set to [4.0 sec] in the
default setting.
TRANS CURVE
Select the transition curve.
The figures below show the transition curve of each mode.
*1: parameter level
*2: transition of time
START TIMER
LINEAR
Select to make the transition linearly.
G
SOFT STOP
Select to make the transition slowly at the end.
SOFT TRANS
Select to make the transition slowly at the
beginning and end, and linearly in between.
G
OFF
Select to start the shot transition immediately.
5 sec
Select to start the shot transition after 5 seconds.
10 sec
Select to start the shot transition after 10 seconds.
20 sec
Select to start the shot transition after 20 seconds.
*1
*2
*1
*2
*1
*2
,
continued
