Pla
yba
ck
Playback
51
Displaying the date/time and
camera settings data – Data code
During playback, you can view the date/time
data and the camera settings data that are
automatically recorded while recording
pictures on a tape.
1
Set the POWER switch to VCR.
2
Press DATA CODE on the camcorder
or Remote Commander during
playback or playback pause.
Each time you press the button, the
indicators appear in turn as follows:
Date/time
t
Camera settings data
t
(no
display)
Camera settings data display
In the date/time data display, the date and time
is displayed in the same area.
If you record the picture without setting the
clock, [--- -- ----] and [--:--:--] will appear.
A
SteadyShot off
B
Exposure
C
Aperture value
If you manually adjust the aperture value to
the maximum,
appears.
D
Gain
E
Shutter speed
F
White balance
appears when pictures recorded by
using the shot transition function are played
back.
To hide the camera settings data
Select the
(OTHERS) menu, [DATA
CODE], then [DATE] (p. 80).
Each time you press DATA CODE, the date/
time indicator turns on and off.
Displaying the video information
– Status check
You can check the setup value of the
following items.
• Audio setup such as audio mix (p. 64)
• Output signal setup ([VCR HDV/DV], etc.)
(p. 70)
• Functions assigned to the ASSIGN buttons
(p. 86)
1
Press STATUS CHECK.
2
Turn the SEL/PUSH EXEC dial to
display the desired item.
Each time you turn the dial, the items
appear in the following order:
AUIDO
t
OUTPUT
t
ASSIGN
To turn off the video information
Press STATUS CHECK.
F 1 . 7
1 0 0
6 dB
0 0 : 0 0 : 0 0 : 0 0
AUTO
6 0
min
6 0
min
HDV1080
i
