6-96
HVR-Z1J/Z1U/Z1N/Z1E/Z1P/Z1C
1. Removal procedure
1)
Remove soldering at the two locations
A
and remove the C-
IN switch (S903)
1
.
2)
Remove soldering at the four locations
B
and remove the T
reel sensor (H902)
2
.
3)
Remove soldering at the four locations
B
and remove the S
reel sensor (H901)
3
.
2. Attachment procedure
1)
Connect the S reel sensor (H901)
3
to the FP-826 flexible
board by soldering it at the four locations
C
.
2)
Connect the T reel sensor (H902)
2
to the FP-826 flexible
board by soldering it at the four locations
B
.
3)
Align the two dowels
D
and connect the C-IN switch (S903)
1
to the FP-826 flexible board by soldering it at the two
locations
A
.
2-3-22. C-IN Switch (S903), S Reel Sensor (H901) and T Reel Sensor (H902)
1
C-IN switch (S903)
Soldering it at the
two locations
A
Soldering it at the
four locations
B
Soldering it at the
four locations
C
2
T reel sensor (H902)
3
S reel sensor (H901)
Two dowels
D
Use the rubber finger tip cover
Lead-free solder
Wire type
Soldering iron
Soldering iron tip
Temperature of the
soldering iron tip
Contacting time of
soldering iron tip
:
∅
0.6
: 941 made by Hakko
: T1-1BC
: 300
±
10
°
C
: within 2 sec
Points to be noted
Soldering
