6-104
HVR-Z1J/Z1U/Z1N/Z1E/Z1P/Z1C
2-3-30. M Slider Assy (2)
1. Removal procedure
(continued from the previous items 1) through 5) on previous page)
5)
Remove the cam gear shaft and the M slider shaft from the two
shaft holes
A
of the M slider assy
1
.
6)
Remove the top tip
B
of the M slider assy
1
from the notch
of the mechanical chassis in the direction of the arrow.
7)
Remove the M slider assy
1
.
2. Attachment procedure
1)
Apply grease to the cam gear shaft, the M slider shaft (neck
groove of the shaft where the M slider slides) and the pinch
driving arm.
Amount of grease: a ball of 1.0 mm diameter of grease
2)
Align the hole of the pinch driving arm and the hole of the
mechanical chassis.
3)
Insert the top tip
B
of the M slider assy
1
into the notch of
the mechanism chassis, and at the same time install the M slider
assy
1
into the GL driving arm.
4)
Align the
v
mark of rotary encoder with the tooth bottom
between second and third teeth
F
.
5)
Install the cam gear shaft and the M slider shaft into the tow
shaft holes
A
of the M slider assy.
(to be continued to next items 6) through 9) on previous page)
1
M slider assy
M slider assy
M SLIDER ASSY
Notch
Hole of the pinch
driving arm
Hole of mechanical
chassis
Cam gear shaft
Shaft hole
A
Top tip
B
Cam gear shaft
M slider shaft
Neck groove of the shaft where the
M slider slides
M slider shaft
GL driving arm
Conversion
gear shaft
Apply grease when installing it
Amount of grease: a ball of 1.0 mm
diameter of grease
• When installing the M slider assy
1
, confirm that
the GL driving arm is in contact with the conversion
gear shaft.
• Confirm that you have not forgotten to insert the
top tip
B
of the M slider assy
1
into the notch
of the mechanical chassis. The M slider assy
1
should not have any deformation.
Points to be noted
Apply grease when installing it
Amount of grease: a ball of 1.0 mm
diameter of grease
Points to be noted
Key Points in Re-assembling
Rotary encoder
Cam gear
Points to be noted
F
Pinch driving arm
Apply Grease
Apply Grease
