![background image](http://html.mh-extra.com/html/sony/giga-juke-nas-sc500pk/giga-juke-nas-sc500pk_operating-instructions-manual_420553163.webp)
NAS-SC500PK.GB.4-114-863-
11
(1)
1
GB
Troubleshooting
“An error has occurred in the internal system.”
appears and the unit enters standby mode.
The system’s automatic protection function has
activated. Disconnect the 12V AC power adaptor,
wait about 30 seconds, and then reconnect it.
AOSS connection
“No wireless station/access point in AOSS mode
found.” appears.
The AOSS button on the wireless station/the wireless
LAN access point has not been pressed. Do the AOSS
setup again.
Place the unit and the wireless station/the wireless
LAN access point close to each other and do the
AOSS setup again.
“An error occurred while transferring AOSS
information.”, “An error occurred in security
information.”, or “An error occurred while
transferring security key.” appears.
There was an information exchange failure between
the unit and the wireless station/the wireless LAN
access point. Wait a while, and then do the AOSS
setup again.
Place the unit and the wireless station/the wireless
LAN access point close to each other and do the
AOSS setup again.
“Another device is connected to the access point.
Try again later.” appears.
The AOSS setup is being performed for another
device. Wait a while, and then do the AOSS setup
again.
“Multiple wireless stations/access points in AOSS
mode found. Try again later.” appears.
Multiple wireless stations/wireless LAN access points
in AOSS mode were detected. Wait a while, and then
do the AOSS setup again.
HOME NETWORK
You cannot connect the unit to a network.
(“Cannot connect to the server.”, “A
communication error occurred.”, or “A
communication error occurred. Information
retrieval cancelled.” appears.)
“GIGA JUKE Wireless Player” appears and the unit
does not go on.
The “GIGA JUKE” Music Server may be in
“Standard (power save)” standby mode. Turn on the
“GIGA JUKE” Music Server or set the standby mode
to “Quick start-up” (page 125).
Make sure that the wireless station/the wireless LAN
access point is turned on.
Make sure that your “GIGA JUKE” Music Server and
computer are turned on.
The network settings on the unit may be incorrect.
Enter the Settings menu and select [Device
information] – [Network information] to check the
settings.
The “GIGA JUKE” Music Server or computer may be
unstable. Restart it.
Confirm that the “GIGA JUKE” Music Server and
the computer are connected to the wireless station/
the wireless LAN access point correctly.
Check the following conditions to confirm that the
“GIGA JUKE” Music Server and the computer are
properly prepared:
The server has started.
The server function is set to [Start].
This unit has been registered.
Place the unit and the wireless station/the wireless
LAN access point close to each other.
If the ICF (Internet Connection Firewall) function
is active on the computer, this may prevent the unit
from connecting to the computer. You may need
to change the firewall settings to allow the unit
to connect. (For details on changing the firewall
settings, refer to the operating manual of your
computer).
If you format the system of the “GIGA JUKE” Music
Server or performed a system recovery on your
computer, perform the network settings again (page
135).
Summary of Contents for Giga Juke NAS-SC500PK
