NAS-SC500PK.GB.4-114-863-
11
(1)
11
GB
Troubleshooting
The contents recorded by the Recording Timer
is not complete. Some of the material at the
beginning or in the middle are missing.
A power failure occurred while the timer setting
was in standby mode or the power cord was
disconnected.
You performed an operation, such as an editing
operation, or you backed up the data shortly before
the Recording Timer was activated.
The unit was subjected to shocks or vibrations. Place
the unit at a stable location.
Back up
After performing an incremental back up
operation, the size of the backed up data is
double that of the original.
When the incremental backup was performed, the
clock was incorrectly set (the clock was set to a time
prior to the time the last back up was performed).
The clock setting reverts to its default setting if the
power cord is disconnected from the wall outlet
for a while. Set the clock correctly and perform an
incremental backup again (pages 126 and 127).
Perform a full backup operation (pages 126 and 127).
During the restoration of audio data, a message
similar to the following one may appear.
[The backup file that you have just been restored has
been subjected to multiple restorations in the past. In
the OpenMG system, restrictions may be placed on
the restoration of copyrighted materials that have been
restored 4 or more times. This message appears when
the backup file you are using has been restored 4 or more
times.]
If a restored file becomes invalid due to a
malfunction in a peripheral component or severe
instability in the unit’s system
Consult the local authorized service facility.
If validation of a file fails even after many attempts at
validations
Check the USB hard disk drive containing the
backup data for damage.
Moving track data
The sender and receiver fail to connect.
Confirm that the direction setting of two systems
(the sender and the receiver) is correct.
Confirm that moving track data is supported by both
the sender and receiver systems.
It takes a long time to connect.
This sometimes happens when the sender system has
a large amount of track data.
Some track data cannot be moved.
If the track data is in an audio format not supported
by the receiver system, the data cannot be moved.
The jacket picture for the track that was moved
cannot be displayed.
If the picture is in the format that is not supported by
the receiver system, the picture cannot be moved.
Others
The unit works poorly.
The unit may be under the influence of static
electricity or other factors. In this case, restart the
unit. If the unit still works poorly, reset the unit
(page 153).
If any warning message appears, do as the message
says.
Five alphanumeric digits appear in the display.
The self-diagnosis function has activated. A service
number consisting of five alphanumeric letters
(e.g., E 00 11) appears in the display when the self-
diagnosis function activates to prevent abnormal
operation. When this service number appears,
consult the local authorized service facility and
report this service number to the service personnel.
Summary of Contents for Giga Juke NAS-SC500PK
