![background image](http://html.mh-extra.com/html/sony/giga-juke-nas-sc500pk/giga-juke-nas-sc500pk_operating-instructions-manual_420553153.webp)
NAS-SC500PK.GB.4-114-863-
11
(1)
1
GB
Troubleshooting
Troubleshooting
Troubleshooting
If a problem occurs while operating the unit,
follow the steps described below before consulting
the nearest Sony dealer. If an error message
appears, it is recommended that you make a note
of its contents for reference.
1
Check to see if the problem is listed
in this “Troubleshooting” section.
For details about troubleshooting the Instant
(S-IWS) connection, refer to the supplied
leaflet “Setup Guide”.
2
Check the customer support site of
Sony Europe at
http://support.sony-europe.com/ (for
customers in Europe only).
You will find the latest support information
and a FAQ at this web site.
3
If after steps 1 and 2 you still cannot
solve the problem, consult your
nearest Sony dealer.
If the problem persists after doing all of the
above, consult your nearest Sony dealer.
“GIGA JUKE” Music Server
How to reset the unit
It is usually unnecessary to reset this unit.
However, on rare occasions, the unit enters an
abnormal state and stops responding to button or
on-screen operations. In this case, reset the unit
by pressing the
button together with the
(power) button on the unit.
Power
The unit does not turn on.
Disconnect the power cord from the wall outlet.
After about a minute, reconnect the power cord and
press the
(power) button to turn on the unit.
After you connect the power cord and turn on
the unit, the messages “Setting up”, “Please wait.”,
“Turning-off after setting is applied.” appear in
the display and the unit automatically turns off.
This is not a problem. After the power cord is
connected, the unit automatically makes the initial
settings and enters standby mode.
The unit turns on when you press the
(power)
button.
It takes a while for the unit to turn off while the
messages “Setting up”, “Please wait.”, “Turning-off
after setting is applied.” are displayed.
If the unit’s HDD has a large amount of recorded
data, it will take a while before the unit turns off.
It takes a while for the unit to turn on as the
messages “Setting up” and “Please wait.” are
displayed.
If you use the unit in an environment without a
broadband router, it takes about 30 seconds for the
unit to obtain an IP address and then to turn on.
The IP address set for the unit is already being used
by another device.
Set a different IP address.
Summary of Contents for Giga Juke NAS-SC500PK
