NAS-SC500PK.GB.4-114-863-
11
(1)
10
GB
The following items cannot be moved.
— “Favorite” of the HDD Jukebox
— Settings (e.g., network settings, timer settings.)
When track data has been moved from an older model,
automatic analysis must be performed before the
“SensMe™ Channels” function can be used.
Tracks that have been manually moved between the
“SensMe™ Channels” in the sender system will be
automatically returned to their original “SensMe™
Channels” in the receiver system.
1
Connect the sender system to the
receiver system with a network (LAN)
cable.
Network (LAN) cable
2
In the sender system, enter the
Settings menu and select [Move
track data].
3
Read the contents in [Read me], and
then select [Next].
4
Select the direction for the track data
from the [Moving direction] pull-
down menu, and then select [Check].
5
Repeat steps 2 to 4 in the receiver
system.
If all of the data cannot be moved for some
reason (for example, because of insufficient
HDD space or limits on the number of folders
in the receiver system), a message will appear.
To cancel moving, select [Close], and then
select [Stop] in step 6. The unit automatically
restarts after cancelling.
6
When the data moving display
appears, select [Start].
7
Select [Yes].
The moving starts.
When the moving has completed, “Track data
move was completed properly.” appears in the
display. The unit automatically restarts, and
then turns off.
Summary of Contents for Giga Juke NAS-SC500PK
