![background image](http://html.mh-extra.com/html/sony/giga-juke-nas-sc500pk/giga-juke-nas-sc500pk_operating-instructions-manual_420553026.webp)
NAS-SC500PK.GB.4-114-863-
11
(1)
GB
When the indicators flash 4 times simultaneously:
There is a malfunction in the wireless network. If this
happens, do the procedure “When the connection fails
or a malfunction has occurred in the wireless station”
(this page) to reconnect the network.
*
2
When an AOSS connection fails, the AOSS indicator
flashes rapidly. If this happens, do the procedure
“When the connection fails or a malfunction has
occurred in the wireless station” (this page) to
reconnect the network.
When the connection fails or a
malfunction has occurred in the
wireless station
Do the following procedure to reset the network
connection.
1
Disconnect the 5V AC power adaptor
from the wireless station.
2
Make sure all the devices are correctly
and firmly connected (except for the
5V AC power adaptor of the wireless
station).
3
Reconnect the 5V AC power adaptor
to the wireless station and wait
until the WIRELESS indicator starts
flashing.
4
Press and hold the RESET button for
about 5 seconds using something
with a pointed tip, such as a small
pin, and then wait until the INSTANT
indicator lights up and the AOSS
indicator turns off (this may take
several minutes).
If this does not occur on the wireless station,
press the RESET button again.
5
Set up the network connection again.
For details on network connection setting,
refer to the supplied leaflet “Setup Guide”.
Summary of Contents for Giga Juke NAS-SC500PK
