Sony Giga Juke NAS-SC500PK Operating Instructions Manual Download Page 200

Page: 200 / 203

NAS-SC500PK.GB.4-114-863-

(1)

. Tiff

this software and its documentation for any purpose is

hereby granted without fee, provided that (i) the above

all copies of the software and related documentation, and

(ii) the names of Sam Leffler and Silicon Graphics may

not be used in any advertising or publicity relating to the

software without the specific, prior written permission of

Sam Leffler and Silicon Graphics.
THE SOFTWARE IS PROVIDED “AS IS” AND

WITHOUT WARRANTY OF ANY KIND, EXPRESS,

IMPLIED OR OTHERWISE, INCLUDING

WITHOUT LIMITATION, ANY WARRANTY

OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE.
IN NO EVENT SHALL SAM LEFFLER OR SILICON

GRAPHICS BE LIABLE FOR ANY SPECIAL,

INCIDENTAL, INDIRECT OR CONSEQUENTIAL

DAMAGES OF ANY KIND, OR ANY DAMAGES

WHATSOEVER RESULTING FROM LOSS OF USE,

DATA OR PROFITS, WHETHER OR NOT ADVISED

OF THE POSSIBILITY OF DAMAGE, AND ON ANY

THEORY OF LIABILITY, ARISING OUT OF OR IN

CONNECTION WITH THE USE OR PERFORMANCE

OF THIS SOFTWARE.
Copyright (c) 1985, 1986 The Regents of the University

of California.

Berkeley by James A. Woods, derived from original work

by Spencer Thomas and Joseph Orost.
Redistribution and use in source and binary forms are

permitted provided that the above copyright notice

and this paragraph are duplicated in all such forms

and that any documentation, advertising materials,

and other materials related to such distribution and

use acknowledge that the software was developed by

the University of California, Berkeley. The name of

the University may not be used to endorse or promote

products derived from this software without specific prior

written permission.
THIS SOFTWARE IS PROVIDED “AS IS” AND

WITHOUT ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, WITHOUT

LIMITATION, THE IMPLIED ARRANTIES OF

MERCHANTIBILITY AND FITNESS FOR A

PARTICULARPURPOSE.

. DDES

Outerbridge.

(GEnie : OUTER; CIS : [71755,204]) Graven Imagery,

1992.

. JPEG

This product is based in part on the work of the

Independent JPEG Group.
“this software is based in part on the work of the

Independent JPEG Group”

. flex

This product includes software developed by the

University of California, Berkeley and its contributors

. ftp

This product includes software developed by the

University of California, Berkeley and its contributors

. portmap

This product includes software developed by the

University of California, Berkeley and its contributors

. telnet

This product includes software developed by the

University of California, Berkeley and its contributors

. file

1992, 1994, 1995.

Software written by Ian F. Darwin and others; maintained

1994-2004 Christos Zoulas.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR

AND CONTRIBUTORS “AS IS” AND ANY EXPRESS

OR IMPLIED WARRANTIES, INCLUDING, BUT

NOT LIMITED TO, THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE ARE DISCLAIMED.

IN NO EVENT SHALL THE AUTHOR OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT,

INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT

NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE

GOODS OR SERVICES; LOSS OF USE, DATA, OR

PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY,

WHETHER IN CONTRACT, STRICT LIABILITY, OR

TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY

OF SUCH DAMAGE.

10. bsdiff

IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE

ARE DISCLAIMED. IN NO EVENT SHALL THE

AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,

INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT

NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE

GOODS OR SERVICES; LOSS OF USE, DATA, OR

PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY,

WHETHER IN CONTRACT, STRICT LIABILITY, OR

TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY

OF SUCH DAMAGE.

Summary of Contents for Giga Juke NAS-SC500PK












































































































































































































Search results

Summary of Contents for Giga Juke NAS-SC500PK

Reviews:

Brands by name

Popular brands

Sony Giga Juke NAS-SC500PK, Operating Instructions Manual

Search results

Summary of Contents for Giga Juke NAS-SC500PK

Reviews:

Brands by name

Popular brands