Sony Ericsson Xperia SO-03d, Instruction Manual

Page: 114 / 286

112 Settings
Using the Wi-Fi function, you can connect to
an access point for your home, company
network or public wireless LAN services to
use mail and Internet.
･
Even when Wi-Fi is on, packet communication
is available. However, while you connect Wi-Fi
network, Wi-Fi comes first.
･ When a Wi-Fi network is disconnected,
connection is automatically switched to a 3G/
GPRS network. Note that packet
communication fee applies for using 3G/
GPRS network.
･
Turn the Wi-Fi function to off when you do
not use Wi-Fi to cut battery power
consumption.
Before using Wi-Fi
To use Wi-Fi, turn on Wi-Fi and search
available Wi-Fi network, then connect it.
･
To access the Internet using Wi-Fi, connect to
Wi-Fi network in advance.
❖
Information
･
Make sure to receive enough signal strength for
using Wi-Fi. The signal strength of the Wi-Fi network
varies by the location of the terminal. Moving closer
to the Wi-Fi router might enhance the signal
strength.
■
Reception interference caused by
Bluetooth devices
Bluetooth devices and wireless LAN
(IEEE802.11b/g/n) devices use the same
frequency band (2.4GHz). If you use
Bluetooth devices near a wireless LAN
device, reception interference may occur or
the communications speed may lower.
Also, you may hear noise or have a
connection problem. Communication may
be interrupted or sound may be lost while
streaming data, etc. In these cases, do the
following:
･ Keep the terminal and Bluetooth device
to be connected wirelessly 10 or more
meters away from a wireless LAN device.
･
Within 10 meters, turn off the Bluetooth
device to be connected.
1
From the Settings screen (P.107),
tap [Wireless & networks].
2
Mark [Wi-Fi] checkbox.
･ The terminal scans for available Wi-Fi
networks.
❖
Information
･
It may take a few seconds before the Wi-Fi
connection is on.
About Wi-Fi
Turning on Wi-Fi