SOLARFOCUS Therminator II, Installation Manual

Page: 9 / 44

Product information
Installation manual thermi
nator
II touch 9
Intermediate store 110 litre with suction system (suction heads or suction auger)
* Access to the back of the
boiler must be provided (ap-
prox. 45 cm on the left or right)
*** Optional item: automatic
switchover from log wood to
pellets
For dimensions B and T see
technical data table
Intermediate store 250 litre with suction system (suction heads or suction auger)
Boiler cm A
thermi
nator
II 22 45
thermi
nator
II 30 45
thermi
nator
II 40 47
thermi
nator
II 49 54
thermi
nator
II 60 54
* Access to the back of the
boiler must be provided (ap-
prox. 45 cm on the left or right)
** Covered length
*** Optional item: automatic
switchover from log wood to
pellets
3.3.3 Wood chip boiler - direct extraction
Boiler cm A
thermi
nator
II 30 47
thermi
nator
II 40 47
thermi
nator
II 49 59
thermi
nator
II 60 52
* Covered length
** Installation angle α from 0° to
180°
For dimensions B and T see
technical data table
3.3.4 Shaker motor for stainless steel combustion grate
(Series with wood chip boiler, optionally with dual fuel boiler: Item Autom. switching of log wood to pellets )
Observe the following minimum side clearances for the boiler
(for subse-
quent installation or possible replacement of the actuating rods
1
):
- thermi
nator
II 18-30: 23 cm
- thermi
nator
II 36-40: 27 cm
- thermi
nator
II 49-60: 33 cm
Boiler installation
room
1
Storage area
[cm]
Boiler room
[cm]
Storage area
Boiler room
For dimensions B and T see technical data table
Storage area
[cm]
200 to 600 (0.5 m gradation)
Storage area
Boiler room
[cm]
Agitator diameter 200 to 400
(0.5 m gradation)
200 to 600
(0.5 m gradation)