SOLARFOCUS Therminator II, Installation Manual

Page: 22 / 44

Installation
22 Installation manual thermi
nator
II touch
5.9 Intermediate pellet store, 110 litres

The following illustrations show the installation of the intermediate pellet store with suction system (art.
no. 6218). The assembly of the intermediate pellet store for manual filling (art. no. 6219) is basically
done the same way, but the connection of the pellet hoses and the connection of some electrical compo-
nents (suction turbine, filling level sensor) does not apply.

If, when mounting the intermediate pellet store 110 litre , the hot air fan is mount-
ed on the left side of the boiler, then do not mount the fan cover (housing).
5.9.1 Application range (with suction system)
- As an intermediate store for the pellet suction system on the biomass boiler thermi
nator
II and thermi
nator
II
touch.
- Pre-assembled with high-performance suction turbine, suction pipe, hose clamps and filling level sensor.
- Supplied ready to connect to the boiler electrical power element.
- Can only be installed on the left side of the boiler.
- Art. no. 6218

Can be optimally used for a boiler output up to 30 kW.
5.9.2 Functional components
1 Suction hose connection (pellets)
2 Container filling level sensor
3 Inspection opening
4 Container (volume 110 litres)
5 Container screw
6 Connection hose
7 Feed auger motor
8 B = Return air hose connection
9 Adjustable foot
10 Plate slide back-burning protection
11 Feed auger
12 Suction turbine
4
1
2
3
10
11
12
6
7
8
9
5