SoftBank 940SC, User Manual

Page: 247 / 338

Handset Security
11-4
11
Activating/Canceling Auto Lock
If it is
On, Auto lock
is automatically activated
when Display is turned off.
a
Tap Menu
→
Settings
→
Touch panel
b
Under
Auto lock
,
On
or
Off
Activating/Canceling Password Lock
After
Password lock
is activated, phone password
is required for handset operations such as turning
on handset or turning off the Display. No operations
are accepted until you enter the correct password,
except some operations such as receiving calls.
a
Tap Menu
→ Settings →
Security
b Password lock
c
Select an option
■ To Activate It When Turning Off
Display or on Handset Power :
Auto
■
To Activate It When Turning On
Handset :
At power On
■
To Deactivate It :
Off
d
Enter Phone Password
→
Tap OK
Activating/Canceling PIN Code
PINs are security codes for USIM Card. For details,
see "USIM Card" (
f P.1-7).
To activate PIN Certification each time the power is
turned on, set this function to
On
.
Setting
a
Tap Menu
→ Settings → Security
b
Under
PIN certification
,
On
or
Off
c
Enter PIN
→
Tap OK
Canceling
If PIN or PIN2 is incorrectly entered three consecutive
times, PIN Lock or PIN2 Lock is activated to restrict
handset operations. To cancel PIN Lock or PIN2
Lock, perform following operations.
a
In PUK Code entry window,
enter PUK Code
→
Tap OK
b
Enter new PIN or PIN2
(four- to eight-digit)
→
Tap OK
c
Enter new PIN or PIN2 again
(four- to eight-digit)
→
Tap OK
Note
・
For more information about PUK and PUK2,
contact SoftBank Mobile Customer Center,
General Information (
f P .15-27) .
・
Entering incorrect PUK Code ten
consecutive times locks USIM Card (turning
handset off does not reset the count) .
・
Once locked, USIM Card cannot be
unlocked . Contact SoftBank Mobile
Customer Center, General Information
(
f P .15-27) .
Advanced
s
●
Activate/Cancel PIN Certification (
r
P.14-22)
●
Change PIN ( r P.14-22)
●
Change PIN2 ( r P.14-22)