39
EN
DIRIS DIGIWARE - 546420C - SOCOMEC
10 .1 .2 . Using Easy Config
Easy Config is the configuration software used to set device parameters easily and quickly. Parameters are set in
successive steps:
Network
—
> Loads
—
> Measurement method
—
> Values to be stored
—
> Alarms
—
> End of configuration
(1)
(2)
For each setting selected
(1)
a customised screen appears, depending on the connected device
(2)
.
Network configuration
In the electrical network configuration menu, The electrical network is configured from the DIRIS Digiware U
module. In this menu, the user selects the type of network (three-phase, single-phase, etc.), the nominal voltage
(must be correctly configured for the voltage detection feature to work properly), the network frequency, the
direction of phase rotation and whether or not a voltage transformer is used.
