37
EN
DIRIS DIGIWARE - 546420C - SOCOMEC
10. conFiguration
Configuration can be carried out using the Easy Config configuration software or directly from the DIRIS Digiware D-xx
remote display. The Easy Config software is used to configure DIRIS Digiware directly via USB, RS485 or Ethernet.
When the DIRIS Digiware system contains a DIRIS Digiware D-xx display or a DIRIS G-xx communication gateway,
connecting the USB cable to the display or gateway allows you to configure the full system without disconnecting
the USB cable.
To set the parameters from the remote display, refer to the manual for the display.
10.1. Configuration using Easy Config
10 .1 .1 . Connection modes
Configuration using Easy Config directly (USB)
USB
DIRIS Digiware S
PC
Easy
Config
USB cable for
configuration:
ref.: 4829 0050
Easy
Config
Configuration using Easy Config via a DIRIS G gateway (USB)
RS485
RS485
RS485
DIRIS Digiware C-31
DIRIS Digiware U
Digiware Bus
DIRIS Digiware S
DIRIS G
DIRIS
COUNTIS
RS485
DIRIS B-30
Easy
Config
PC
USB
Configuration using Easy Config via a DIRIS Digiware D-xx display (USB)
Easy
Config
PC
USB
DIRIS Digiware D-40 / D-50 / D-70
RS485
RS485
DIRIS B-30
DIRIS
COUNTIS
DIRIS Digiware U
Digiware Bus
DIRIS Digiware S
* RS485 input only with DIRIS Digiware D-50 and D-70 displays
