29
EN
DIRIS DIGIWARE - 546420C - SOCOMEC
8. status anD auto-aDDressing leDs
8.1. Device lEDs
Several LEDs can be used to easily identify the status of the devices at any time.
• Diris Digiware u-xx and io-xx:
U
Power supply
Alarm
Communication
Metrology
Addressing button
O
leD state
Fixed
blinking
Pulse
on
In operation
During 10 seconds, if an
identification request is initiated
from the Easy Config software
1 second to start-up
alarm
Indicates the presence of a
measurement alarm or logical
alarm (do not have priority over
system alarms)
U-xx: Indicates the presence of a
system alarm (*)
IO-xx: Not available
1 second to start-up
com
Address conflict during an auto
detection process initiated from a
D-xx display or a G-xx
Address OK
1 second during startup and
when a
frame received is processed
Not available
U-xx: not available
IO-10: Corresponds to the
change of state of the inputs
(IN1, IN2, IN3, IN4) which are
configured in logical mode
U-xx: not available
IO-10: The metrological pulse
weight of input 1 (IN1) configured
in pulse counter mode
(*) Network rotation alarm possibly indicating a configuration error
