manualshive.com logo in svg

Snom C520-WiMi, User Manual

Share
Download
Snom C520-WiMi User Manual Download Page 53

48

Registering wireless microphones

The wireless microphones delivered with the C520-WiMi are preregistered.  If you 
do need to register a wireless microphone (e.g., if you have purchased a C520-WiMi 
Replacement Microphone), it must be registered to the phone.

•   The phone must be idle when registering wireless microphones.  
•   The phone supports two microphone registrations; previous registrations must be 

deregistered before you can register the two microphones you want to use. 

•   Do not remove the wireless microphones from the charging cradles during the 

entire registration process.  A microphone that was registered before but is not in 
the charging cradle during a new registration process will be deregistered.

•   The LED status indicator on each wireless microphone flashes red and green 

alternatingly during registration.

1.   Place the microphones you want to register into the phone's charging cradles.

2.  Press   . 
3.  Press 

3 User settings

.

4.  Press 

4 Wireless microphones

.

5.   Press 

2 Deregister

 and confirm by pressing "

Yes

" to delete any previous 

registrations.  If sucessful, the display will say "

Wireless microphones are 

deregistered

".

6.   Press 

1 Register

 to register one microphone.  The display will say "

Registering....

".  

If successful, you will hear a confirmation tone and the display will say "

Registration 

succeeded

".  The status indicator of the registered microphone switches to a steady 

red light while the second, unregistered microphone continues to flash red and 
green alternately.

7.   Press 

1 Register

 again to register the second microphone.  The display will say 

"

Registering....

".  If successful, you will hear a confirmation tone and the display 

will say "

Registration succeeded

".  The status indicator of the second microphone 

switches to a steady red light.

•   If registration fails, the display will say "

Registration failed

". Remove the 

microphones from the charging cradles and put them back in.  Repeat the entire 
registration process, steps 2 to 7.

•   To stop a registration in progress, press  . The display says "

Registration 

cancelled

".  One or both microphones may be deregistered.  Repeat the 

registration process, steps 1 to 7, to register them.

Configuring the Phone

Summary of Contents for C520-WiMi













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands