Snom C520-WiMi User Manual Download Page 12

Page: 12 / 76

Getting Started

1. Status LED.

• Indicates the system status. See "Status indicators overview" on page 10.

2. Loudspeaker

3. Cell 2/Headset Bluetooth status LED

• Indicates the status of the Bluetooth-connected device. See "Status indicators

overview" on page 10.

4. Display.

LCD screen.

5. Menu/OK key (toggle).

• Press to show the menu.

• Press to select an item, or save an entry or setting in a menu.

6. Navigation keys (four-way toggle)

• Press top or bottom edge to scroll up or down, respectively, while in a menu,

phonebook, or call log.

• Press left or right edge to move the cursor left or right, respectively, while

entering names or numbers.

• Press left or right edge to view additional function key labels and view multiple

active calls.

7. Call key.

Press

to make, answer, or end a call.

8. Dial pad keys

• Press to enter numbers or characters.

• While editing names, press

to add a space.

9. Front microphone

10. Mute key

During a call, press to mute and unmute all microphones in the system.

11. Volume key (toggle)

• When the phone is idle, press to increase the ringer volume, press to

lower the ringer volume.

• During a call, press to increase louspeaker volume, press to lower

louspeaker volume.

Base unit overview (front), continued

Summary of Contents for C520-WiMi













































































Search results

Summary of Contents for C520-WiMi

Reviews:

Related manuals for C520-WiMi

Brands by name

Popular brands

Snom C520-WiMi, User Manual

Search results

Summary of Contents for C520-WiMi

Reviews:

Related manuals for C520-WiMi

Brands by name

Popular brands