Snom C520-WiMi User Manual Download Page 36

Page: 36 / 76

Using the Call menu (continued)

Enabling missed call alerts:

1. From the Call menu, press to highlight

Missed call alert

2. Press .

The Missed call alert menu appears.

3. Press or to turn missed call alerts on (Yes) or off (No).
4. Press

Save

Enabling call waiting alerts:

1. From the Call menu, press to highlight

Call waiting

2. Press .

The Call waiting menu appears.

3. Press or to turn call waiting alerts on (Yes) or off (No).
4. Press

Save

When

Show alert

is on and you are on a call, incoming calls are displayed on the

screen. When

Show alert

is off:

• Incoming calls are rejected and no notification appears on the screen.
• Rejected incoming calls are logged as missed calls.
See also

Call Waiting Settings

on page 56.

Phone Features

Summary of Contents for C520-WiMi













































































Search results

Summary of Contents for C520-WiMi

Reviews:

Related manuals for C520-WiMi

Brands by name

Popular brands

Snom C520-WiMi, User Manual

Search results

Summary of Contents for C520-WiMi

Reviews:

Related manuals for C520-WiMi

Brands by name

Popular brands