Snom C520-WiMi User Manual Download Page 34

Page: 34 / 76

The

Call

menu appears.

Setting Do Not Disturb

1. From the

Call

menu, if necessary, press or to highlight

Do Not Disturb

2. Press .
3. On the Do Not Disturb menu, highlight the line for which you want to turn Do Not

Disturb On or Off.

4. When the desired line is highlighted, press or to turn Do Not Disturb On or Off.
5. Press

Save

When Do Not Disturb is on,

appears on the idle screen.

Setting Call forward

1. From the Call menu, press to highlight

Call forward

2. Press .

The Call forward menu appears.

3. Highlight the line for which you want to configure call forward settings, and then

press .

4. On the next screen, press to highlight the desired option:

•  Call forward always
•  Call forward busy
•  Call forward no ans.

5. Press .
6. On the next screen, press or to turn call forwarding On or Off.

Phone Features

Summary of Contents for C520-WiMi













































































Search results

Summary of Contents for C520-WiMi

Reviews:

Related manuals for C520-WiMi

Brands by name

Popular brands

Snom C520-WiMi, User Manual

Search results

Summary of Contents for C520-WiMi

Reviews:

Related manuals for C520-WiMi

Brands by name

Popular brands