manualshive.com logo in svg

Snom C520-WiMi, User Manual

Share
Download
Snom C520-WiMi User Manual Download Page 50

45

Restarting the phone

From the 

Preferences

 menu, open the 

Restart phone

 submenu by pressing 

3

DEF

.  

Alternatively, scroll with   or   to highlight the setting and press 

. 

 The 

Restart phone

 

screen appears.

•  To restart the phone, press 

Yes

.

•  To return to the Preferences menu, press 

No

.

Display

Use the Display menu to set screen appearance and backlight behavior.

1.  From the 

User settings

 menu, open the Display submenu by pressing 

2

ABC

.  

Alternatively, scroll with   to highlight the submenu and press 

.

 or 

.

  The 

Display

 

menu appears.

Setting the contrast level:

1.  From the 

Display

 menu, ensure that 

Contrast

 is highlighted.

2.  Press   or   to set the contrast level from 1 to 7 (4 is the default setting).
3.  Press 

Save

 .

Setting the backlight level for the active phone

1.  From the 

Display

 menu, press 

 

to highlight 

Backlight ON

.

2.  Press   or   to select Off, Low, Medium, or High (High is the default setting).
3.  Press 

Save

 .

Setting the backlight level for the idle phone

1.  From the 

Display

 menu, press 

 

to highlight 

Backlight idle

.

2.  Press   or   to select Off, Low, Medium, or High (Off is the default setting).
3.  Press 

Save

 .

Configuring the Phone

Summary of Contents for C520-WiMi













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands