![background image](http://html1.mh-extra.com/html/snell-and-wilcox/supervisor-lx/supervisor-lx_operation-and-installation-manual_1309048018.webp)
SuperVisor LX
SECTION 3
FGAX3249400MANAA
100701
Version 1 Issue 2
3.7
Installation- LX Control Shoebox
POWER CONNECTIONS
This is the mains power connector suitable for a
standard IEC type power cord and contains a
1 A(T) 250 V fuse and a spare fuse.
To gain access to the fuses the tab on the right
hand side of the connector assembly should be
lifted. Always replace the fuses with the same type.
If a plug is fitted to the power cord a fuse of 5A
(Fast) should be installed.
The Power On/Off switch is an integral part of this
connector assembly. Press
I
to switch ON, press
O
to switch OFF.
Power ON will be indicated by the illumination of
the LED on the front panel.
NETWORK CONNECTOR
This 9 pin `D' connector has no function on this
unit.
Do not make connections to this connector.
BNC CONNECTOR
This single BNC connector allows the unit to be
connected to, and communicate with, the
Supervisor LX mainframe.
See page 3.1 for interconnection details.
SERIAL PORT
This 9 pin `D' connector has no function on this
unit.
Do not make connections to this connector.
115-230 VAC
60/50 Hz
0.2A
Fus
e
I
O
T
1A
250V
NETWORK
NETWORK
SERIAL
PORT
Lift Tab to
access fuses