SuperVisor LX
SECTION 4
FGAX3249400MANAA
100701
Version 1 Issue 2
4.6
Pattern
The SuperVisor LX has a built in test pattern
generator.
Short Press:
This will toggle the test pattern
generator on and off.
Note that when a test pattern is showing, all
controls continue to function as normal.
However any changes to Input Config settings
Color or Tint will not be seen until the test pattern is
removed.
Long Press:
This will display the test pattern
selection menu.
Patterns
Active Area
Full Black
10% Grey Box
25% Grey Box
50% Grey Box
75% Grey Box
90% Grey Box
100% Grey Box
White Field
Staircase
Pluge
Color Bars
Cross Hatch
Luma Sweep
Chroma Sweep
1, 2, 3, 4, 5, 6, 7, 8 (Memory)
The SuperVisor LX has 8 on board user memories.
By default they are named Memory1 to Memory8
but can be renamed. Up to 15 characters may be
used for the memory name.
Short Press:
This will recall the selected memory
The name of the memory location will be shown in
the first line of the status display and remain
displayed for 5 seconds.
Long press:
This will save the current settings to
the selected user memory. The status display will
change to show the name of the selected memory
and it will ask for confirmation of the save
operation.
Example:
To confirm the Save operation, press the
◀
◀
◀
◀
Save
button.
To cancel the operation, press the
Home
button or
any function button.
Note that if the Save operation is not confirmed
within 30 seconds the operation will timeout.
2
–
M e m o r y 2
◀
◀
◀
◀
S a v e
