![background image](http://html1.mh-extra.com/html/snell-and-wilcox/supervisor-lx/supervisor-lx_operation-and-installation-manual_1309048032.webp)
SuperVisor LX
SECTION 4
FGAX3249400MANAA
100701
Version 1 Issue 2
4.13
◀
◀
◀
◀
Brightness/Contrast/Color
Each input has its own set of Brightness, Contrast
and Color settings.
Preset
Brightness/Contrast/Color
0
Brightness/Contrast
Color
The ranges of adjustable values depend on the
input selected and are given below.
Brightness
Composite/YC Component
Digital 1,2
Range
-75 to +75
-36 to +27 -128 to +127
Default
0
0
0
Contrast
Composite/YC Component
Digital 1,2
Range
-20 to +20
-64 to +63 -128 to +127
Default
0
0
0
Color
Composite/YC Component
Digital 1,2
Range
-36 to +72
-31 to +32 -128 to +127
Default
0
0
0
◀
◀
◀
◀
Tint
(Applies to Composite and YC NTSC inputs only)
Tint
Preset
0 Deg
Tint
The range of control is a ±30 degrees and preset is
to 0.
◀
◀
◀
◀
VHS Lock
(Applies to Composite and YC NTSC
inputs only)
This function will optimize the synchronizing
abilities of the SuperVisor LX for signals derived
directly from VHS or similar VCR’s.
◀
◀
◀
◀
VHS Flutter
(Applies to Composite and YC
NTSC inputs only)
This function will optimize the SuperVisor LX
synchronizing abilities for signals derived directly
from VHS or similar VCR’s.
◀
◀
◀
◀
YC Delay
This control allows the relative timing between the
luminance and the chrominance signals to be
adjusted.
YC Delay
Preset
3 Clks
YC Delay
The range of control is –3 to +4 clock pulses and
preset is to 0.
◀
◀
◀
◀
External Sync
(Applies to Component input only)
When enabled this will select the SYNC INPUT as
the reference signal; when not enabled the
reference signal will be derived from the Y signal.
◀
◀
◀
◀
YPbPr/RGB
◀
◀
◀
◀
RGB/YPbPr
(Applies to Component input only)
When selected the text of this item will toggle
between
YPbPr/RGB
and
RGB/YPbPr.
When this item displays
YPbPr/RGB
the unit will
expect a YPbPr input.
When this item displays
RGB/YPbPr
the unit will
expect a RGB input.