![Snell & Wilcox Supervisor LX Operation & Installation Manual Download Page 6](http://html1.mh-extra.com/html/snell-and-wilcox/supervisor-lx/supervisor-lx_operation-and-installation-manual_1309048006.webp)
SuperVisor LX
SECTION 0
FGAX3249400MANAA
100701
Version 1 Issue 2
0.6
WARRANTY
This unit is covered by the standard Snell & Wilcox 1-year warranty as detailed below:
Warranty
1. Snell & Wilcox warrants to the purchaser that new equipment will be free from defects in material and
workmanship for one year from the date of shipment by Snell & Wilcox, subject to the exclusions set out
below. Snell & Wilcox exclusive obligation (and purchasers only remedy) for any defect shall be to repair
or replace, at Snell & Wilcox option, at no charge except for shipping charges, any equipment or parts
returned prepaid to an approved Snell & Wilcox service center.
2. Within the warranty period, purchaser shall notify Snell & Wilcox of any defect in material or workmanship.
If a part is defective, Snell & Wilcox may forward a new part to purchaser, invoice for the part and credit
invoice upon receipt of the defective part returned, freight prepaid. Snell & Wilcox reserve the right to
inspect or repair equipment on purchaser’s premises.
3. Snell & Wilcox specifically excludes the following from warranty coverage, and assumes no responsibility
for repair or replacement thereto:
a) Equipment which has been modified, repaired or altered by procedures other than those published or
authorized in writing by Snell & Wilcox, which has been subjected to misuse, misapplication, improper
maintenance, negligence, acts beyond the purchasers control (including failure of or excessive electrical
power or failure of environmental control equipment);
b) used equipment;
c) fuses, lamps and batteries;
d) equipment which has had its serial number altered, defaced or removed.
4. No repair or replacement shall extend the warranty period.
5. NOTE: Please be certain that you have received appropriate upgrade training prior to performing
upgrades; failure to complete this training will invalidate the warranty.
6. For the warranty to be valid upgrade work must be reported by unit serial number and old cards returned in
the supplied packing plus this form correctly completed and returned.