SuperVisor LX
SECTION 4
FGAX3249400MANAA
100701
Version 1 Issue 2
4.16
◀
◀
◀
◀
Assign Groups
Assign Groups
Input Cfg
Size
ProcAmps
Out Cfg
Crop
Col Temp
Enhance
Each memory can have any or all of the above
groups assigned to it. Each group represents a
collection of settings as given in the table below.
When a memory is recalled, only those settings in
its associated group(s) are restored.
As an
example, if Memory1 had only the Procamps group
selected in the above list, then, when it was
recalled the settings restored would be Brightness,
Contrast, Color and PC Contrast. No other settings
would be affected.
Unless specifically required, it is recommended not
to restore the Output Config group because it
takes significantly longer to load than any of the
other groups.
The factory shipped condition is that all groups are
assigned to each memory.
Note that group assignments do not affect a
memory save. A save always stores the complete
machine state.
Input Config
Crop
Size
Input select
Crop left
H position
VHS lock
Crop right
V position
YC delay
Crop top
H size
External Sync
Crop bottom
V size
YPbPr/RGB Select
Zoom
Input brightness
Input contrast
Input color
Input tint
VHS Flutter
VGA thru
HD thru
Chroma enhance
Chroma threshold
Color Temperature
Procamps
Enhance
Output Config
Red Low
Brightness
Horizontal enhance
IO Lock
Green Low
Contrast
Vertical enhance
Output Resolution
Blue Low
Color
Gamma
Output Syncs
Red High
PC Contrast
Process Mode
Green High
Follow PC (Keying on/off)
Blue High
Key Mode
PC Red High
Key red/green/blue
PC Green High
Key adjust red/green/blue
PC Blue High
Key threshold
Monochrome
TPG Select
