![background image](http://html1.mh-extra.com/html/snell-and-wilcox/supervisor-lx/supervisor-lx_operation-and-installation-manual_1309048022.webp)
SuperVisor LX
SECTION 4
FGAX3249400MANAA
100701
Version 1 Issue 2
4.3
STATUS DISPLAY
The status of the unit will be shown in the display
following these actions:
•
After
power-up
•
When the Home button is pressed
•
If the panel has not been operated for a period
of about 60 seconds.
Example of the Status Display
The example above indicates that a 625 line 50 Hz
RGB + Syncs input has been selected, the output
signal is set to 1024 x 768 at 60 Hz and the Keying
mode is set to PC + Video.
Line 1
Scrolling unit name banner (default unit name is
Lighthouse
)
Line 2
This shows three items of information, the Input
Signal Selection, the Input Line Standard and the
Input Field Rate.
The Input Signal Selection can be one of the
following:
Composite
Component (on systems using the old ADC card)
RGB
RGB+S (separate syncs)
YpbPr
YpbPr+S (separate syncs)
Digital 1
Digital 2
For details of Input Channel selection see
pages 4.7 and 4.12.
The Input Line Standard can be one of the
following:
525
(NTSC)
625
(PAL or SECAM)
The Input Field Rate can be one of the following:
60
(NTSC)
50
(PAL or SECAM)
Line 3
This shows the Output Resolution and the Output
Frame Rate.
The Output Resolution can be one of the following:
640x480
800x600
1024x768
VGA Thru
HD Thru
For details of Output Format selection see
pages 4.17 and 4.23.
Line 4
When keying is enabled this shows the current Key
Mode.
The Key Mode can be one of the following:
PC
(PC Only)
Video (Video Only)
PC+V (PC + Video)
For details of Keying Mode selection see pages
4.19, 4.23 and 4.24.
t h o u s e
L i g h t h o u s e
L i
I : R G B S + S
6 2 5
5 0
O : 1 0 2 4
x
7 6 8
6 0
K : P C + V