![background image](http://html1.mh-extra.com/html/snell-and-wilcox/supervisor-lx/supervisor-lx_operation-and-installation-manual_1309048036.webp)
SuperVisor LX
SECTION 4
FGAX3249400MANAA
100701
Version 1 Issue 2
4.17
◀
◀
◀
◀
Out Cfg
IO Lock on/OFF
Output Rate...
Output Syncs...
Process Mode...
Output Config
◀
◀
◀
◀
IO Lock on/OFF
This function allows the output frequency (
O
) to
follow the input frequency (
I
).
When set to
OFF
the output frequency of the
Supervisor LX is always 60 Hz (unless Keying or
Pass Thru is enabled).
When IO Lock is set to
ON
then the output
frequency follows the input video frequency. For
example, when viewing a 50 Hz source, the output
frequency will be 50Hz; when viewing a 60 Hz
source, the output frequency will be 60 Hz.
Default is to OFF.
◀
◀
◀
◀
Output Rate
This function allows the output resolution to be set.
Output Rate
VGA (640x480)
SVGA (800x600)
XGA (1024x768)
◀
◀
◀
◀
Output Syncs
The SuperVisor LX provides an output of TTL
compatible sync pulses. These can be set to
Normal or Inverted using this menu.
Output Syncs
Normal
Inverted
Select to suit the requirements of the display
device.
0V
+4V
TTL - Normal
TTL - Inverted
0V
+4V
Default is to Inverted.
◀
◀
◀
◀
Process Mode
This function allows the selection of two different
processing modes for the input signal.
Auto Detect
Video Mode
Film Mode
Process Mode
◀
Video Mode
This mode will optimize the processing for signals
that originated from video.
◀
Film Mode
This mode will optimize the processing for signals
that originated from film.
◀
Auto Mode
This mode will automatically recognize signals that
originated from video or film and apply the
appropriate processing.
◀
◀
◀
◀
Color Mute
This function allows the Red, Blue and Green
content of the output picture to be independently
turned off.
Color Mute
Red Off
Green Off
Blue Off
◀
◀
◀
◀
Patterns
This provides a selection of test patterns.
Patterns
Active Area
Full Black
10% Grey Box
25% Grey Box
50% Grey Box
75% Grey Box
90% Grey Box
100% Grey Box
White Field
Staircase
Pluge
Color Bars
Cross Hatch
Luma Sweep
Chroma Sweep
Each pattern requires a certain amount of time to
load. In general this is no more than a few
seconds.