![background image](http://html1.mh-extra.com/html/snell-and-wilcox/supervisor-lx/supervisor-lx_operation-and-installation-manual_1309048033.webp)
SuperVisor LX
SECTION 4
FGAX3249400MANAA
100701
Version 1 Issue 2
4.14
◀
◀
◀
◀
Chroma Enhance
Applies to Composite and YC inputs only.
Preset
Chroma Enhance
0
Chroma Enhance
Signals that come from a VHS source may benefit
from some enhancement to the chroma (color)
portion of the signal.
The range of control is from 0 to 63 units and
preset is to 0
◀
◀
◀
◀
Chroma Threshold
Applies to Composite and YC inputs only.
Chroma Threshold
Preset
2
Chroma Threshold
This control can be used to set one of four
threshold levels. High frequency signals whose
amplitude is below the selected threshold will be
removed and therefore not enhanced.
A signal with a lot of high frequency noise will
benefit from a higher threshold setting.
◀
◀
◀
◀
Col Temp
This menu allows the red, green and blue gain
(peak level) and red, green and blue bias (black
level) to be individually set.
This menu allows the color temperature of the
video signal to be adjusted.
Col Temp
Red Low
Grn Low
Blu Low
Red High
Grn High
Blu High
◀
R/G/B Low
This menu allows the red, green and blue low
lights (black levels) for the signal to be individually
set.
R/G/B Low
0
R/G/B Low
The range of control is from -128 to +127 units and
preset is to 0.
◀
R/G/B High
This menu allows the red, green and blue highs
(peak level) for the signal to be individually set.
R/G/B High
0
R/G/B High
The range of control is from -128 to +127 units and
preset is to 0.
◀
◀
◀
◀
Pass Thru
This menu allows either the VGA or the HD signal
to pass through the unit unprocessed
Pass Thru
VGA Thru
HD Thru
The SuperVisor LX has a computer video input.
This can accept either a VGA or an HD signal. To
display this signal, use the appropriate selection in
the above menu.