![background image](http://html1.mh-extra.com/html/snell-and-wilcox/iqh1s-1u/iqh1s-1u_installation-manual_1309050078.webp)
IQH1S IU Enclosure
SECTION 4
IQH1SOPS
23/11/06
www.snellwilcox.com
Version 1 Issue 4
4.33
Recons.
This item indicates any errors occurring during the
communication of connection data in the Rollcall
network.
Condition
Error value
Normal
0 or constant value
Fault
Value increases at an
unacceptable rate.
Errors occur on a regular basis
Possible Faults
•
Faulty T piece or cable
•
Missing termination(s)
•
Incorrect value of termination(s)
•
Clash of a RollCall Address
•
Network cable length exceeded*
•
Number of units per segment exceeded*
Please refer to
RollCall System Integrators Manual.
Logging
This menu determines the information made
available for logging.
Log Server
SN=
VERSION=
Log OS Version
OS_VERSION=
Log Build Number
BUILD_NUMBER=
Log Hardware Ver.
HARDWARE_VERSION=
Log Module Status
MODULE_STATUS=
Log Gway Ctrl Sess
SESSIONS=
Log Last Modified
LAST_MODIFIED=
Log Temp 1 Name
TEMP_1_NAME=
Log Temp 1 State
TEMP_1_STATE=
Log Temp 1 Celsius
TEMP_1_CELSIUS=
Log Voltage 1 Name
VOLTAGE_1_NAME=
Log Voltage 1 State
VOLTAGE_1_STATE=
Log Voltage 1 Value
VOLTAGE_1_VALUE=
Log Voltage 2 Name
VOLTAGE_2_NAME=
Log Voltage 2 State
VOLTAGE_2_STATE=
Log Voltage 2 Value
VOLTAGE_2_VALUE=
Log Faults
FAULT=
Log Module Comms
MODULE_COMMS=
Log Recon State
RECON_STATE=
Log Uptime
UPTIME=
Log Restarted At
RESTARTED_AT=
Logging
The value of the selected Log item will be displayed
in the window as shown below:
Log Values
Log Values
OK:LOW
OK
For details of Logging Fields please see page 27.