![background image](http://html1.mh-extra.com/html/snell-and-wilcox/iqh1s-1u/iqh1s-1u_installation-manual_1309050065.webp)
IQH1S IU Enclosure
SECTION 4
IQH1SOPS
23/11/06
www.snellwilcox.com
Version 1 Issue 4
4.20
Intentionally Empty Slot
If the slot
should not
have a unit installed the
Installed Unit Name widow will show
No Unit
Fitted
and the
Installed Unit ID
window
will show
No Unit
.
The editable name widow will be empty and the
Bound Type ID widow will show
None
.
In the absence of other modules the Gateway
does not log Module Status for this slot position.
Module Absent – Unit Bound
If the slot should have a particular module fitted (as
set by the Bound Unit function) but if it is absent
the Installed Unit Name widow will show
No Unit
Fitted
and the
Installed Unit ID
window
will show
No Unit
.
Correct Module Fitted
If a module is fitted that matches the bound type
then the editable name is used in the network
browser.
In the absence of other modules the Gateway will
log Module Status as OK, and show Module Status
= OK on the Logging Page. The gateway also logs
MSG=UNIT PRESENT for the slot position.
However, the editable name widow will show the
intended name and the Bound Type ID widow will
show the intended ID.
Module Fitted – No Bound Unit
If a module is fitted in the slot but no bound type is
assigned to this slot then the slot will show the
generic type name for the module type and will
appear in the network browser by its slot number
and generic type.