![background image](http://html1.mh-extra.com/html/snell-and-wilcox/iqh1s-1u/iqh1s-1u_installation-manual_1309050062.webp)
IQH1S IU Enclosure
SECTION 4
IQH1SOPS
23/11/06
www.snellwilcox.com
Version 1 Issue 4
4.17
RollCall Control Templates for the IQHS1U Enclosure RCIF
Control
This function displays information about the
controllers for each slot.
Any of the 6 slots may be interrogated and the
following information displayed.
Packet Count
When the modules receive commands from control
clients the number of commands are counted.
If the
Update Packet Stats
item is checked the
number of control packets from the currently
selected connected controller and from all
connected controllers is shown to the right of the
controller address. The number of blind control
packets is shown to the right of the blind controller
address.
If the
Update Packet Stats
item is unchecked the
packet counts will be replaced with dashes (-).
Update Packet Stats
When checked the packet counts will be updated.
When unchecked the packet counts the packet
counts will be replaced with dashes (-).
Note that the packets are still counted while
Update Packet Stats
is disabled. When enabled
the Gateway will display current totals;
they will
not restart from zero
.
When selected this item will reset all of the packet
counters to zero.
Show Session
This controls which client is displayed by the other
Control menu items.
Note that for this and other screens the following
applies to the scroll bars:
The
and
symbols at the ends of the
scroll bar allow the value to be adjusted in discrete
steps.
The numerical value will be shown next to the scroll
bars and selecting Preset
will return the setting
to the calibrated value for that item.
For text boxes the following applies:
To change the text, type the new text in the text
area (the return symbol changes to red
) and
then select
(return) to save the new text. The
symbol will then become black again.
Selecting Preset
will return the text to the
default text.